Payment & Shipping Terms:
|Thickness Of The Plate::||0.3-0.8mm||Roller Steps:||11 Rows|
|Power:||5.5KW||Roller Material::||45# Steel|
|Diameter Of Active Shaft::||70mm||Dimension(L*W*H)::||3.8m*0.6m*1.5m|
11 Rows Combo 5“ 6” Color Sheet Seamless Gutter Machine with Panasonic PLC
|Use:||Roof gutter||Production Capacity:||8-12m/min|
|medium plate:||16-20mm, final design depends on the profile||control system:||Panasonic PLC|
|Voltage:||380V 50hz three-phase||Dimension(L*W*H):||3.8m*0.6m*1.5m|
1 year, technical support is provided
|manual decoiler:||capacity is 3t||thickness:||0.3-0.8mm|
|payment:||T/T, L/C||delivery:||within 60 working days|
Technique parameters of the processing line
(1) Suitable material: Colored armor plate
(2) Thickness of the plate: 0.3-0.8mm
(3) Input width of the plate: Both decks is 1000mm
(4) Productivity: 12m/min
(5) Roller steps: 11 rows
(6) Roller material: 45# steel
(7) Diameter of active shaft: 70mm
(8) Wall thickness of the main forming machine: 12mm steel plate (final design depends on your final profil
(9) Main forming machine body: 300mmH steel
(10) Transmission chain is25.4mm, Reducer is 5.5kw Xingxing Cycloid which works stably and no noise.
(11) Cutting hydraulic system adapts CDF- 10 gear pump, the motor power is 4kw, no noise, work stably, long life expectancy.
(12) PLC control system, easy to operate, high precision and work stably.
(13) Dimensions of major structure: 3800mm*600mm*1500mm
Components of line:
No. Name Unit Qty
1 Decoiler set 1
2 Main machine for roll forming set 1
3 Control system set 1
4 Hydraulic system set 1
5 Post cut set 1
6 Output table set 2
(1) Manual decoiler
Un-powered; Single head; Max. Capacity: 3000kg; Coil inner-diameter: 508mm
(2) Roll-Forming M/C:
Steps: 11 Rows; Material: 45# steel; Voltage: 380V/50Hz. Line speed: 12m/min; Rolling chromium thickness: 0.05 mm
(3) Cutting Mechanism
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.
Match equipment: One set of cutting tool, one hydraulic tank, one cutter machine. Stop cut, Post cut cutting to length tolerance: ± 2mm; Cutting tool material: GCr12 with quenched treatment 60-62° C
(4) Hydraulic System
It is controlled by gear wheel oil pump.
After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job.
(5) Computer control cabinet:
It adopts Taida PLC to control.
The target piece length is adjustable and digit of it can be adjusted Computed mode has two modes: Automatic and manual one.
One counter gauges length, pulses, and decides length